
10
Specifications for the B&W unit:
• SONY CCD image sensor
• Signal system: EIA or CCIR
• Picture elements: 512(H) x 492(V)(EIA)
• Scanning system: 2:1 Interlace
• Horizontal resolution: 420 TV lines
• Video output: 1.0V p-p composite video at 75 ohm
• BNC video output connector
• Min. illumination: 0.3 Lux (F/1.4)
• AGC/CCD IRIS control switch: 3 position switch which controls the CCD IRIS and AGC on/off
- Lower: AGC control is OFF (0dB) and CCD IRIS control is OFF
- Middle: AGC control (max 14dB) is ON and CCD IRIS control is OFF. Use this setting when the monitor
image is underexposed (low light level).
- Upper: AGC control is OFF (0dB) and CCD IRIS control is ON; automatic exposure control of the CCD
image sensor is activated. Use this setting when the monitor image is overexposed.
• LED power indicator
• Power on/off switch: when in upper position, the video power is ON and the red LED is lit; when in lower
position, the video power is OFF and the red LED is not lit.
• Power requirement: 12V DC (taken internally from the camera's battery)
• Power consumption: 1.4W (120mA)
• Operating temperature -5 to +113°F (-20 to +45°C)
• Size of the control module: 2.05" x 1.45" x 0.72" (52mm x 37mm x 18mm)
• Body: Black extruded aluminum
Specifications for the color unit:
• SONY CCD image sensor
• Picture elements: NTSC 768(H) x 494(V), PAL 752(H) x 582(V)
• Scanning system: 2:1 Interlace
• Horizontal resolution: 470 TV lines
• Video output: 1.0V p-p composite video at 75 ohm
• BNC video output connector
• Min. illumination: 0.8 Lux, F1.2 AGC: ON
• Auto white balance (AWB)
• AGC/CCD IRIS control switch: 3 position switch which controls the CCD IRIS and AGC on/off
- Lower: AGC control is OFF (0dB) and CCD IRIS control is OFF
- Middle: AGC control (max 14dB) is ON and CCD IRIS control is OFF. Use this setting when the monitor
image is underexposed (low light level).
- Upper: AGC control is OFF (0dB) and CCD IRIS control is ON; automatic exposure control of the CCD
image sensor is activated. Use this setting when the monitor image is overexposed.
• LED power indicator
• Power on/off switch: when in upper position, the video power is ON and the red LED is lit; when in lower
position, the video power is OFF and the red LED is not lit.
• Power requirement: 12V DC (taken internally from the camera's battery)
• Power consumption: 2.4W (200mA)
• Operating temperature -5 to +113°F (-20 to +45°C
• Size of the control module: 2.05" x 1.45" x 0.72" (52mm x 37mm x 18mm)
• Body: Black extruded aluminum
Comentários a estes Manuais