
17
Specifications :
• Signal system : NTSC or PAL standard
• Picture elements- NTSC: 768(H) x 494(V), PAL: 752(H) x 582(V)
• Scanning system: NTSC - 525 lines, PAL - 625 lines, 2:1 interlace
• Sync system: Internal
• Horizontal resolution: 470 TV lines
• Mode: Color or B&W
• Flicker reduction: 100% for speeds above 10 fps
• Min. illumination: 1 Lux, F1.2 AGC:ON
• White balance: ATW(auto), 3200K, 5600K
• Digital gain control set by decimal pushbutton switch
• Video output: BNC connector, composite signal 1Vp-p, 75 ohm
• Power requirement: 24 V DC (from the camera's battery)
• Power consumption: 3.1W (130mA)
Note: All switches are mounted onto the old external video control unit. The switches function in the same
way as those on the flickerfree color video assist for the Aaton XTR (see page 19).
Moviecam SL B&W Video Assist (Videofinder) Conversion to Color Reg or Flickerfree
The old B&W video assist electronics is replaced by a new set which provides the color video image in PAL or
NTSC video formats. We are offering conversion to a regular or flickerfree color video assist.
Specifications for the regular color unit:
• Signal system: NTSC or PAL
• Picture elements: NTSC- 768(H) x 494(V), PAL-
752(H) x 582(V)
• Scanning system: NTSC - 525 lines, PAL - 625
lines, 2:1 interlace
• Sync system: Internal
• Horizontal resolution: 470 TV lines
• Min. illumination: 1 Lux, F1.2 AGC:ON
• White balance: AWB(auto)
• Gain Control: 0dB or AGC
• Video outputs: Composite 1 V p-p, 75 ohm
• Power consumption: 2.4 W, 200mA/12V
• Operating temperature -5 to +113°F (-20 to +45°C)
Specifications for the flickerfree color unit are the same as those for the Moviecam Super 35mm unit.
Comentários a estes Manuais