
15
Specifications for the B&W unit:
• SONY CCD image sensor
• Signal system: EIA or CCIR
• Picture elements: 512(H) x 492(V)(EIA)
• Scanning system: 2:1 Interlace
• Horizontal resolution: 420 TV lines
• Video output: 1.0V p-p composite video at 75 ohm
• BNC video output connector
• Min. illumination: 0.3 Lux (F/1.4)
• AGC/CCD IRIS control switch: 3 position switch which controls the CCD IRIS and AGC on/off
- Lower: AGC control is OFF (0dB) and CCD IRIS control is OFF.
- Middle: AGC control (max 14dB) is ON and CCD IRIS control is OFF. Use this setting when the monitor
image is underexposed (low light level).
- Upper: AGC control is OFF (0dB) and CCD IRIS control is ON; automatic exposure control of the CCD
image sensor is activated. Use this setting when the monitor image is overexposed.
• LED power indicator
• Power on/off switch: when in upper position, the video power is ON and the red LED is lit; when in lower
position, the video power is OFF and the red LED is not lit
• Power requirement: 12V DC
• Power consumption: 1.4W (120mA)
• Operating temperature -5 to +113°F (-20 to +45°C)
Specifications for the color unit with on screen display (OSD) control (APEX door only):
• CCD sensor - SONY 1/3" interline transfer
• Picture elements: 811 (H) x 508 (V) NTSC
• Scanning system: NTSC - 525 lines, PAL - 625 lines, 2:1 interlace
• Horizontal resolution: 480 TV lines
• Video output: 1.0 V p-p composite video 75 ohm
• BNC video output connector
• Min. illumination: 0.8 Lux (F=1.2)
• Brightness, Chroma, Tint, Sharpness by OSD Control
• White balance Auto/Fix (3200-10000K)
• Gain control: AGC on/off
• Iris control: CCD Iris on/off
• Electronic shutter 1/60-1/120,000s
• BLC function on/off
• Digital Zoom on/off
• Gamma correction: 0.45
• Power requirement: 12 V DC
• Power consumption: 1.8 W (150mA)
• Power ON/OFF switch
• • LED power indicator
Comentários a estes Manuais